RESURFACING TECHNICAL INFO

PoolSeal installs several resurfacing systems. Each system is catered to a different application. here is a chart of the PHYSICAL STRENGTH PROPERTIES OF ELITE CRETE POLYMER MODIFIED CEMENT SURFACES and the MULTICOAT KRETE KOTE SYSTEM:

PERCENT OF ELITE CRETE
POLYMER SOLIDS WHEN MIXED WITH CEMENT
UNMODIFIED CEMENT ELITE CRETE
CPR 1000
0 0.22
RATIO OF WATER TO CEMENT (1) 0.48 0.35
TENSILE STRENGTH, PSI
28 Days Air Cure
28 Days Wet Cure (2)
235
535
723
-----
COMPRESSIVE STRENGTH, PSI
28 Days Air Cure
28 Days Wet Cure (2)
2390
5795
5872*
-----
FLEXURAL STRENGTH, PSI
28 Days Air Cure
28 Days Wet Cure (2)
610
1070
1435
-----
SHEAR BOND ADHESION, PSI (3)
28 Days Air Cure
28 Days Wet Cure (2)
45 (A)
85 (A)
577 (C)
-----
IMPACT STRENGTH,
In. - Lbs.

28 Days Air Cure
28 Days Wet Cure (2)
6
7
28
-----
ABRASION RESISTANCE, % Wt. LOSS (4)
28 Days Air Cure
28 Days Wet Cure (2)
23.80
5.07
.17
-----

PoolSeal has the ability to remove/repair cracks from the pool deck or patio. The products we use to do so in conjunction w/ the addition of new expansion joints virtually eliminates recurrence of most surface cracks. Our crack repair products allow lateral movement of substrate cracks up to approximately 1/8" without telegraphing cracks through the surface overlay which in unique in decorative concrete.

  TEST METHOD RESULTS
1. Weatherometer ASTM G23 2000 Hrs - Passed
2. Compressive Strength ASTM C109...

45 Days air cured

2595psi
3. Tensile Strength ASTM-C190 457psi
4. Bond Strength (Flatwise Tension) ASTM-C297 225psi
5. Abrasion Test ASTM-1242A...

1000cyc-1000gms

39 mil loss
6. Salt Spray ASTM-B117 300 Hrs. - Passed
7. Water Vapor Transmission ASTM-E96A 1.26 Perms
8. 50-Cycle Freeze Thaw ASTM-C67 Passed
9. Flexural Strength ASTM-D790 Modulus of Rupture - 770psi
10. Impact Resistance MIL-D-3134F Passed
11. Flame Spread ASTM-E84 Class A

 


HomeCompanyMasticGalleriesContact Us
©2007-2009 PoolSeal, Inc.
All Rights Reserved. All trademarks are the property of their respective owners.